The Lapmaster Wolters Model 56 PL machine is an uprated version of the Model 48, with a larger diameter lap plate and support plate and correspondingly larger conditioning rings.
The serrated lap plate is made up of twenty four individual segments which are bolted to the support plate.
The height of the surrounding worktable can be adjusted so that it can be set just above the lap plate surface to prevent the sharp edge being exposed.
The lap plate drive system uses a separate motor and worm and wheel reduction gearbox with multibelt drive and is mounted in a substantial floor standing base. The base is fabricated from welded hollow-section steel, clad with removable panels for maintenance. The electrical controls are housed in a console mounted at the front of the machine, and a second emergency stop button is fitted at the rear of the machine.
The machine uses a free abrasive slurry, which is supplied from a separate free standing reservoir, equipped with a pump and driven blade stirrer. A diamond slurry dispensing system can also be fitted if required.
This machine is also available in pneumatic lift version and as an open face machine with three special size conditioning rings.
PRECISION SURFACING SOLUTIONS supports manufacturers in a wide variety of industries in which precision grinding, lapping, polishing, deburring and advanced materials processing equipment is commonly used. They all need high-quality, high-precision, stable and well-engineered machines to manufacture high-quality work pieces.Visit Site
Produced in Germany since 2009, MICRON machines are compact and dynamically rigid grinding machines especially designed for Creep Feed and Profile grinding. MICRON is an industry leader in grinding of Hydraulic components like stators, rotors and van pumps.Visit Site
Founded in 1934, KEHREN is a well-established designer and builder of high-precision grinding machine tools and systems under the following categories: vertical grinding centers, vertical grinding centers with portal design, surface grinders with rotary tables and horizontal spindles, and surface grinders with dual rotary tables and vertical spindles.Visit Site
REFORM Grinding Technology GmbH is specialized in the sales, development & production of grinding machines for various applications at its location in Fulda (Germany).Visit Site
The aba company was founded in 1898 under the name "Messwerkzeugfabrik Alig & Baumgärtel Aschaffenburg", hence the initials aba. Today, the aba Grinding Technologies is exclusively focused on the advancement and production of precision surface and profile grinding machines.Visit Site
ELB-Schliff Werkzeugmaschinen GmbH has been producing surface and profile grinding machines for over 60 years. The company was founded by Edmund Lang in the city of Babenhausen which led to the name "ELB-Schliff".Visit Site
Since 1907 Barnes has been considered a world leader in developing innovative honing and bore finishing technology and processes. The earliest Barnes honing machines were the first to make honing a practical and efficient means of finishing automotive cylinder bores in a production environment.Visit Site
Founded in Chicago in 1948 as a manufacture of lapping and polishing machines for the mechanical seal market, Lapmaster has grown to a worldwide solution provider for more than 20 industries like precision optics and advanced materials.Visit Site
Founded in Germany in 1804 by Mr. Peter Wolters, Peter Wolters has been producing lapping, polishing and fine grinding equipment since 1936. Peter Wolters delivered its first machine to the silicon wafer processing market in 1961 and remains an industry leader in wafer polishing as well as general industry fine grinding.Visit Site