LAPMASTER INTERNATIONAL ("SELLER") WILL ACCEPT BUYER'S ORDER REFERRED TO ON THE ACCOMPANYING QUOTATION ON CONDITION THAT BUYER ASSENTS TO THE TERMS SET FORTH BELOW AND ON THE ACCOMPANYING AND WAIVES ANY DIFFERING TERMS. SUCH ASSENT AND WAIVER IS EVIDENCED EITHER BY BUYER'S PURCHASE ORDER (ANY CONTRARY TERMS OR CONDITIONS OF WHICH SHALL BE DISREGARDED) OR BY ACCEPTING DELIVERY OF THE FIRST SHIPMENT HEREUNDER.
1. Payment and Shipping Terms. Terms are net 30 days F.O.B. shipping point, unless expressly provided to the contrary on the accompanying quotation. Any amount not timely paid shall bear a late charge of two percent (2%) for each month or fraction of a month computed on the outstanding balance until paid in full; provided, however, that such late charges shall not exceed the maximum amount allowed by law.
2. Title and Risk of Loss. Title to products shall pass only upon payment of the full purchase price. Notwithstanding the foregoing, all risk of loss shall be borne by Buyer from the time of delivery of the products by Seller to a public carrier or other manner of transportation.
3. Tooling. Charges for tools, dies and other equipment cover only a portion of their cost and ownership and sole right to possession and use thereof shall not pass to Buyer but shall remain in Seller.
4. Cancellation. Seller at its option and in addition to its other remedies may without liability cancel this order or refuse shipment, if a) Buyer is in default in any payments or other performance due Seller under this or any other agreement b) Buyer becomes insolvent or a petition in bankruptcy is filed with respect to Buyer or (c) causes beyond Seller's control make it impossible to assure its timely performance. Buyer may cancel the remaining unfilled portion of it's order only upon written consent of Seller and payment of the full price for that portion of the order that Seller has substantially completed at time of cancellation plus reasonable cancellation charges which shall include the full profit plus all costs incurred in connection with the canceled portion of the order such as overhead and administrative costs, commitments made by Seller as a consequence of Buyer's order and the cost of all work-in-progress. Cancellation charges shall not exceed the purchase price of the canceled portion of the order.
5. Price. Seller reserves the right to correct quantities or prices due to typographical, clerical, or mathematical errors. The price stated in Seller's quotation or acknowledgment is based upon Sellers current costs. If costs increase during the life of this order, Buyer will be notified of any adjustment of the price; provided, however, that no price adjustment will be made without Buyer's agreement on orders for delivery within 30 days of the date of a price quotation. Buyer shall reimburse Seller for any excise, sales, use or other taxes incident to this transaction for which Seller may be liable or which Seller is required by law to collect.
6. Delivery. Delivery dates are estimates only. Seller shall not be liable for any total or partial failure to deliver or for any delay in delivery or production due to causes beyond its control, including but not limited to acts of God, acts of Buyer, war or civil unrest, priorities, fires, strikes, natural disasters, delays in transportation, or inability to obtain necessary labor or raw materials. Seller shall not be liable in any event for any special, indirect or consequential damages on account of failure or delay in performance regardless of the cause.
7. Assurance of Performance. If Buyer is delinquent in payment at any time, or if in Seller's judgment, Buyer's credit becomes impaired or unsatisfactory, Seller may, in addition to it's other, remedies cancel Buyer's credit, stop further performance, and demand cash, security or other adequate assurance of payment satisfactory to it.
8. Limited Warranty. Seller warrants for a period of one-year following original shipment by Seller (six months in the case of Lapmaster machines, accessories and parts unless otherwise noted) that its products are free from defects in material or workmanship furnished by Seller. Seller will repair or at it's option replace free of charge any product found by it within one year of original shipment to be defective in breach of said warranty upon return thereof transportation prepaid to the location specified by Seller. No returns will be accepted without prior written authorization by Seller. The foregoing is Seller's sole warranty and Buyer's exclusive remedy and IS IN LIEU OF ALL OTHER WARRANTIES, REPRESENTATIONS OR GUARANTEES, EXPRESS OR IMPLIED WHICH ARE HEREBY EXCLUDED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Without limiting the foregoing, in no event shall Seller be liable for loss of use or profits or for any other special indirect or consequential damages, or for defects in design or engineering whether performed by it or by others, or for any amounts in excess of Seller's net price of the product in question whether such amounts are claimed to result from breach of contract or warranty, negligence, strict liability or otherwise.
9. Production Performance Estimates. Any production or performance standards furnished Buyer depend on several variable factors. No such estimates are guaranteed.
10. Compliance with Warnings and Indemnification. In those instances in which Seller provides health or safety information, warning statements, and/or instructions in connection with the installation, use or maintenance, including preventive maintenance, of its products (and Seller assumes no obligation to do so), Buyer agrees to comply with all such information, warnings and instructions. Buyer further agrees to communicate all such information, warnings and instructions to its employees, agents and subcontractors, and to subsequent buyers and users of those products.
11. Repairs: Job Lapping. Seller shall have no liability whatsoever for spoilage or damage to any products, parts or stock furnished for lapping or repair. In addition to the specific exclusions in paragraph 8 above, Seller's liability
shall be limited to cases of its negligence, and then only to the extent of cancellation of its charges for lapping or repairing the spoiled or damaged parts, products or stock.
12. Confidentiality. All technical and commercial information and ideas which Seller has supplied or shall supply Buyer, but excluding information in the public domain or properly in Buyer's possession in tangible form before receiving such information from Seller, ("confidential information") is proprietary to Seller and is disclosed to Buyer in confidence for the limited purpose of assisting Buyer in the evaluation or use of Seller's products. Buyer shall not without Seller's prior written consent, disclose or make available such confidential information to any other person or use such confidential information except for such limited purpose. All confidential information shall be returned to Seller on demand, and, in any event, when no longer needed by Buyer in connection with Seller's products. In addition to Seller's other remedies, Buyer agrees that any benefit or property derived by Buyer from any unauthorized use of confidential information shall be the sole and exclusive property of Seller.
13. Shortages. Claims for shortages must be made within five days after receipt of goods. All other claims must be made within 30 days of shipping date (except for warranty claims, which are governed by Paragraph 8 above).
14. Patents. Buyer will protect and indemnify Seller against all claims arising out of patents, designs, trade secrets, copyrights, or trade names with respect to products manufactured wholly or partially to Buyer's designs or specifications, including any costs, expenses, loss, attorneys' fees, settlement payments, or damages.
15. Government Contracts. If the items purchased hereunder are to be used in fulfilling a contract with the United States Government, Seller will comply with all mandatory provisions required by the government applicable to Seller, provided that Buyer gives Seller written notice of such provisions in sufficient time to permit compliance. In addition, Seller may at it's option adopt any provision of ASPR, DAR or other federal regulations or statutes which is applicable or made to subcontractors by the government in it's prime contract.
16. Export Regulations. Buyer will not export any technical data, or commodities that are controlled by the Export Administration Act or Regulations in violation thereof.
17. Amendments. No addition to, modification or revision of the terms and conditions contained herein shall be valid unless in writing, and signed by duly authorized representative of Seller.
18. Governing Law; Severability. To the extent that the rights and liabilities of the Buyer and Seller are not defined herein, they shall be enforced in accordance with the Uniform Commercial Code as in effect in the State of Illinois, and the agreement between Buyer and Seller shall be construed in accordance with the laws of that State. If any term or condition hereof is found to be illegal or unenforceable, the balance hereof shall remain in full force and effect.
19. Paragraph Captions. The paragraph captions are for convenience only and are not part of these terms and conditions and should not be construed as binding or limiting in any way the scope or context of the provisions hereof.
PRECISION SURFACING SOLUTIONS supports manufacturers in a wide variety of industries in which precision grinding, lapping, polishing, deburring and advanced materials processing equipment is commonly used. They all need high-quality, high-precision, stable and well-engineered machines to manufacture high-quality work pieces.Visit Site
Produced in Germany since 2009, MICRON machines are compact and dynamically rigid grinding machines especially designed for Creep Feed and Profile grinding. MICRON is an industry leader in grinding of Hydraulic components like stators, rotors and van pumps.Visit Site
Founded in 1934, KEHREN is a well-established designer and builder of high-precision grinding machine tools and systems under the following categories: vertical grinding centers, vertical grinding centers with portal design, surface grinders with rotary tables and horizontal spindles, and surface grinders with dual rotary tables and vertical spindles.Visit Site
REFORM Grinding Technology GmbH is specialized in the sales, development & production of grinding machines for various applications at its location in Fulda (Germany).Visit Site
The aba company was founded in 1898 under the name "Messwerkzeugfabrik Alig & Baumgärtel Aschaffenburg", hence the initials aba. Today, the aba Grinding Technologies is exclusively focused on the advancement and production of precision surface and profile grinding machines.Visit Site
ELB-Schliff Werkzeugmaschinen GmbH has been producing surface and profile grinding machines for over 60 years. The company was founded by Edmund Lang in the city of Babenhausen which led to the name "ELB-Schliff".Visit Site
Since 1907 Barnes has been considered a world leader in developing innovative honing and bore finishing technology and processes. The earliest Barnes honing machines were the first to make honing a practical and efficient means of finishing automotive cylinder bores in a production environment.Visit Site
Founded in Chicago in 1948 as a manufacture of lapping and polishing machines for the mechanical seal market, Lapmaster has grown to a worldwide solution provider for more than 20 industries like precision optics and advanced materials.Visit Site
Founded in Germany in 1804 by Mr. Peter Wolters, Peter Wolters has been producing lapping, polishing and fine grinding equipment since 1936. In 2019 Precision Surfacing Solutions acquired the division Wafer plant and service business for photovoltaic and special materials of Meyer Burger. Further Information can be found at www.precision-surface.chVisit Site